Справочное Руководство для Netopia 430 s

■

You can also set the range of EtherTalk Phase II network 
numbers. Select Net Low and enter the lower limit of the 
network number range. Select Net High and enter the upper 
limit of the range.

■

Select the Seeding pop-up menu and choose the seeding 
method for Netopia to use.

You have finished configuring EtherTalk Phase II.

The Netopia ISDN Router can function as a LocalTalk to EtherTalk 
router. This means that a LocalTalk network can be connected to the 
Netopia’s LocalTalk por t. You can enable this feature by configuring 
the Netopia’s LocalTalk por t.

Select LocalTalk Setup in the AppleTalk Setup screen and press 
Return to the LocalTalk Routing Setup screen.

LocalTalk Routing Setup

LocalTalk Enabled:

On

LocalTalk Zone Name:

Unnamed

LocalTalk Net Number: 

0

Seeding...:

Soft-Seeding

Use this screen to set up the LocalTalk Port Routing attributes.

■

If you are using LocalTalk with the Netopia ISDN Router, select 
LocalTalk Enabled and make sure LocalTalk is set to On, which 
is the default.