Справочное Руководство для Netopia 430 s

bytes transferred.

Using TFTP, you can send a file containing a snapshot of the 
Router’s current configuration to a TFTP ser ver. The file can then be 
downloaded by a different Netopia ISDN Router unit to configure its 
parameters (see 

). 

This is useful for configuring a number of Routers with identical 
parameters, or just for creating configuration backup files.

Uploading a file can also be useful for troubleshooting purposes. 
The uploaded configuration file can be tested on a different Netopia 
ISDN Router unit by Farallon or your network administrator.

To upload a configuration file, follow these steps:

1.

Select TFTP Server Name and enter the DNS name or IP 
address of the TFTP ser ver you will use. The DNS name or IP 
address is available from the site where the ser ver is located.

2.

Select Config File Name and enter a name for the file you will 
upload. The file will appear with the name you choose on the 
TFTP ser ver. You may need to enter a file path along with the 
file name (for example, Mypc/Netopia/myfile).

3.

Select Write Config Now and press Return. Netopia will begin 
to transfer the file.

4.

The TFTP Transfer State item will change from Idle to Writing 
Config. The TFTP Current Transfer Bytes item will reflect the 
number of bytes transferred.