Справочное Руководство для Netopia 430 s

To go to the IPX Setup screen, select IPX Setup in the Network 
Protocols Setup screen.

IPX Setup

              IPX Enabled:                         Yes

              Ethernet Network Address:            00000150

              Ethernet Encapsulation...            802.3

              Ethernet Path Delay:                 1

              Ethernet NetBios Packet Forwarding:  Yes

              Ethernet Incoming SAP Filter Set...  <<NONE>>

              Detach Filter Set...

              Default Gateway Address:             00000000

              Filters and Filter Sets...

Return/Enter goes to new screen.

1.

To enable IPX routing, select IPX Enabled and toggle it to Yes.

2.

Select Ethernet Network Address and enter the network 
address of the IPX network connected to the Netopia ISDN 
Router’s Ethernet por t.

Note: If the Ethernet network address is set to zero, the Router 
will attempt to learn the address from any configured IPX device 
on the Ethernet network or from the remote IPX network when a 
call is established.

3.

To change Ethernet encapsulation from the commonly used 
802.3 standard, select Ethernet Encapsulation and choose a 
different encapsulation method.