Справочное Руководство для Netopia 430 s

bytes transferred.

The Router can be configured by downloading a configuration file 
using TFTP. Once downloaded, the file reconfigures all of the 
Router’s parameters as if someone had manually done so through 
the console por t.

To download a configuration file, follow these steps:

■

Select TFTP Server Name and enter the DNS name or IP 
address of the TFTP ser ver you will use. The DNS name or IP 
address is available from the site where the ser ver is located.

■

Select Config File Name and enter the name of the file you will 
download. The name of the file is available from the site where 
the ser ver is located. You may need to enter a file path along 
with the file name (for example, bigroot/config/myfile).

■

Select Read Config Now and press Return. You will see the 
following dialog box:

+-----------------------------------------------------------+

+-----------------------------------------------------------+

|

|

|

Are you sure you want to read the configuration now?

|

|

The device will reset when the transfer is complete.

|

|

|

|        CANCEL

CONTINUE

|

|

|

+-----------------------------------------------------------+

■

Select CANCEL to exit without downloading the file, or select 
CONTINUE to download the file. The system will reset at the 
end of the file transfer to put the new configuration into effect.

■

If you choose to download the configuration file, the TFTP 
Transfer State item will change from Idle to Reading Config. 
The TFTP Current Transfer Bytes item will reflect the number of