Справочное Руководство для Netopia 430 s

To modify a filter, select Change Input Filter (Change Output Filter) in 
the Add Filter Set screen to display a table of filters.

Select a filter from the table and press Return to go to the Change 
Filter screen. The parameters in this screen are the same as the ones 
in the Add Filter screen (see 

).

Change Filter

Enabled:                    No

Forward:                    No

Source IP Address:          0.0.0.0

Source IP Address Mask:     0.0.0.0

Dest. IP Address:           0.0.0.0

Dest. IP Address Mask:      0.0.0.0

Protocol Type:              0

Source Port Compare...      No Compare

Source Port ID:             0

Dest. Port Compare...       No Compare

Dest. Port ID:              0

Enter the IP specific information for this filter.

To delete a filter, select Delete Input Filter (Delete Output Filter) in 
the Add Filter Set screen to display a table of filters. 

Select the filter from the table and press Return to delete it. Press the 
Escape key to exit the table without deleting the filter.