Справочное Руководство для Netopia 430 s
Telephone Services
8-3
Telephone Connections
Inbound:
Directory Number 1 Connection: +--------------------+
Directory Number 2 Connection: +--------------------+
| Reject as Busy |
Outbound: | Phone 1 |
Phone 1 Connection: | Phone 2 |
Phone 1 Service Grade: | Phone 1 & Phone 2 |
| Router |
Phone 2 Connection: +--------------------+
Phone 2 Service Grade: Speech
Follow these steps to configure the Telephone Connections screen:
1.
Select Inbound Directory Number 1 Connection, and press
Return. A pop-up menu displays a list of options.
Return. A pop-up menu displays a list of options.
2.
Select Reject as Busy to block the call, issuing a busy tone to
the par ty tr ying to dial in.
the par ty tr ying to dial in.
Select Phone 1 to direct calls out the Router’s Phone 1 jack,
thereby ringing the phone or device plugged into that jack.
thereby ringing the phone or device plugged into that jack.
Select Phone 2 to direct calls out the Router’s Phone 2 jack.
Select Phone 1 & Phone 2 to ring all devices connected to the
Phone 1 and Phone 2 jacks.
Phone 1 and Phone 2 jacks.
Select Router to direct the incoming call, usually a
data-over-voice call with a speech or 3.1 kHz ser vice, internally
for the Router’s use.
data-over-voice call with a speech or 3.1 kHz ser vice, internally
for the Router’s use.
3.
Select Inbound Directory Number 2 Connection, press Return,
and configure as described in step 2 above. If no number has
been entered for Director y Number 2 in the initial configuration,
the options you select will be stored but will not work.
and configure as described in step 2 above. If no number has
been entered for Director y Number 2 in the initial configuration,
the options you select will be stored but will not work.