Справочное Руководство для Netopia 430 s

IP Address: The Netopia ISDN Router’s IP address, entered in the IP 
Setup screen.

IPX Network Address: The Netopia ISDN Router’s IPX address, 
entered in the IPX Setup screen.

AppleTalk ET Address: The Netopia ISDN Router’s AppleTalk 
address on its EtherTalk Phase II inter face, entered in the AppleTalk 
Setup screen.

AppleTalk LT Address: The Netopia ISDN Router’s AppleTalk 
address on its LocalTalk inter face, entered in the AppleTalk Setup 
screen.

This section is a table showing the current status of each ISDN 
connection. There are four columns in the table:

Profile Name: Lists the name of the connection profile being used, 
if any. This field will also indicate if the B channel is in use for a 
POTS call. 

State: Lists the B-channels in use for this connection.

%Use: Indicates the average percent utilization of the maximum 
capacity (56k, 64k, 112k, or 128k) of the B-channels in use for the 
connection.

Remote Address: Shows the IP address of the connected remote 
network if the connection is using IP. Other wise, shows the IPX 
address of the connected remote network, if using IPX. For POTS 
calls, it shows the called DN if locally originated, other wise the 
calling DN (if available).

Est: Indicates whether the connection was locally or remotely 
established.

More Info: Indicates, in order of priority, the NAT address in use for 
this connection, the IPX address in use (if IP is also in use), or the 
caller ID (if available).