Справочное Руководство для Netopia 430 s

Note: The format in which date and time are displayed is 
dependent on the current ISDN switch protocol. The switch protocol 
can be set in the Netopia ISDN Router’s ISDN Line Configuration 
screen. Changing the switch protocol may change the date and time 
format, as well as the appearance of the Set Date and Time screen. 
When configuring the items in the Set Date and Time screen, you 
must follow the correct format. See 

 to find the correct date and time format for your switch 

protocol setting.

                               Set Date and Time

                     Current Date:               10/03/1995

                     Current Time:               05:59

                     AM or PM:                   PM

Follow these steps to set the system’s date and time:

1.

Select Current Date and enter the date in the appropriate 
format. Use one- or two-digit numbers for the month and day, 
and the last two digits of the current year. The date’s numbers 
must be separated by for ward slashes (/).

2.

Select Current Time and enter the time in the format HH:MM, 
where HH is the hour (using either the 12-hour or 24-hour clock, 
depending on your switch protocol) and MM is the minutes. 

3.

Select AM or PM and choose AM or PM. The AM or PM item 
appears only if the time is in the 12-hour clock format.

You can reset the system by selecting the Restart System item in 
the Statistics, Utilities, Tests screen. 

Main
Menu

Restar t
System

Statistics,

.Utilities,

Tests