Справочное Руководство для Netopia 430 s
2-36
Netopia ISDN Router Reference Guide
Adding a scheduled connection
To add a new scheduled connection, select Add Scheduled
Connection in the Scheduled Connections screen and go to the Add
Scheduled Connection screen.
Connection in the Scheduled Connections screen and go to the Add
Scheduled Connection screen.
Add Scheduled Connection
Scheduled Connection Enable:
On
How Often...
Weekly
Set Weekly Schedule...
Use Connection Profile...
ADD SCHEDULED CONNECTION
CANCEL
Return accepts * Tab toggles * ESC cancels.
Scheduled Connections dial remote Networks on a Weekly or Once-Only
basis.
basis.
Follow these steps to configure the new scheduled connection:
■
To activate the connection, select Scheduled Connection Enable
and toggle it to On. You can make the scheduled connection
inactive by toggling Scheduled Connection Enable to Off.
and toggle it to On. You can make the scheduled connection
inactive by toggling Scheduled Connection Enable to Off.
■
Decide how often the connection should take place by selecting
How Often and choosing Weekly or Once Only from the pop-up
menu. The item directly below How Often allows you to set the
exact weekly schedule or once-only schedule. If How Often is set
to Weekly, the item directly below How Often reads Set Weekly
Schedule. If How Often is set to Once Only, the item directly
below How Often reads Set Once-Only Schedule.
How Often and choosing Weekly or Once Only from the pop-up
menu. The item directly below How Often allows you to set the
exact weekly schedule or once-only schedule. If How Often is set
to Weekly, the item directly below How Often reads Set Weekly
Schedule. If How Often is set to Once Only, the item directly
below How Often reads Set Once-Only Schedule.
Setting days, times, and
duration with the
weekly schedule
■
If you set How Often to Weekly, select Set Weekly Schedule and
go to the Set Weekly Schedule screen. If you set How Often to
Once Only, skip to step 8.
go to the Set Weekly Schedule screen. If you set How Often to
Once Only, skip to step 8.