Справочное Руководство для Netopia 430 s
IPX Setup
5-5
To go to the IPX Setup screen, select IPX Setup in the Network
Protocols Setup screen.
Protocols Setup screen.
IPX Setup
IPX Enabled: Yes
Ethernet Network Address: 00000150
Ethernet Encapsulation... 802.3
Ethernet Path Delay: 1
Ethernet NetBios Packet Forwarding: Yes
Ethernet Incoming SAP Filter Set... <<NONE>>
Detach Filter Set...
Default Gateway Address: 00000000
Filters and Filter Sets...
Return/Enter goes to new screen.
1.
To enable IPX routing, select IPX Enabled and toggle it to Yes.
2.
Select Ethernet Network Address and enter the network
address of the IPX network connected to the Netopia ISDN
Router’s Ethernet por t.
address of the IPX network connected to the Netopia ISDN
Router’s Ethernet por t.
Note: If the Ethernet network address is set to zero, the Router
will attempt to learn the address from any configured IPX device
on the Ethernet network or from the remote IPX network when a
call is established.
will attempt to learn the address from any configured IPX device
on the Ethernet network or from the remote IPX network when a
call is established.
3.
To change Ethernet encapsulation from the commonly used
802.3 standard, select Ethernet Encapsulation and choose a
different encapsulation method.
802.3 standard, select Ethernet Encapsulation and choose a
different encapsulation method.