Справочник Пользователя для Netopia 4522

If you are configuring your router using a Telnet session, your computer must be running a Telnet software 
program.

■

If you connect a PC with Microsoft Windows, you can use a Windows Telnet application or simply run Telnet 
from the Star t menu.

■

If you connect a Macintosh computer, you can use the NCSA Telnet program supplied on the Netopia 4522 
CD. You install NCSA Telnet by simply dragging the application from the CD to your hard disk.

You can per form all of the system configuration activities for your Netopia 4522 through a local serial console 
connection using terminal emulation software, such as HyperTerminal provided with Windows 95, 98, 2000, or 
NT on the PC, or ZTerm, included on the Netopia CD, for Macintosh computers.

The Netopia 4522 back panel has a connector labeled “Console” for attaching the Router to either a PC or 
Macintosh computer via the serial por t on the computer. (On a Macintosh computer, the serial por t is called the 
Modem por t or Printer por t. Newer Macintosh models have USB por ts, so you may need a third-par ty adapter.) 
This connection lets you use the computer to configure and monitor the Netopia 4522 via the console screens.

To connect the Netopia 4522 to your computer for serial console communication, use a console cable 
appropriate to your platform:

■

A DB-9 connector end attaches to a PC.

■

A DB-9 end of the Console cable attaches to the Netopia 4522’s Console por t.

■

If you connect a PC with Microsoft Windows 95, 98, 2000, or NT, you can use the HyperTerminal 
application bundled with the operating system.

■

If you connect a Macintosh computer, you can use the ZTerm terminal emulation program on the supplied 
Netopia 4522 CD.