Руководство Пользователя для Netopia 4741 2a4na

■

You must specify a Key String of up to (and including) 20 characters when DES is selected. When 
encr yption is None, this field is invisible.

■

You can specify that this router will Initiate Connections, acting as a foreign agent (Yes), or only answer 
them, acting as a home agent (No).

■

Tunnels are normally initiated On Demand; however, you can disable this feature. When disabled, the 
tunnel must be manually established through the call management screens.

■

You can specify the Idle Timeout, an inactivity timer, whose expiration will terminate the tunnel. A value of 
zero disables the timer. Because tunnels are subject to abrupt termination when the underlying datalink is 
torn down, use of the Idle Timeout is strongly encouraged.

■

Return to the Connection Profile screen by pressing Escape.

■

Select IP Profile Parameters and press Return. The IP Profile Parameters screen appears.

■

Enter the Remote IP Address and Remote IP Mask for the host to which you want to tunnel.

An administrator interested in securing a network will usually combine the use of VPNs with the use of a firewall 
or some similar mechanism. This is because a VPN is not a complete security solution, but rather a component 
of overall security. Using a VPN will add security to transactions carried over a public network, but a VPN alone 
will not prevent a public network from infiltrating a private network. Therefore, you should combine use of a 
firewall with VPNs, where the firewall will secure the private network from infiltration from a public network, and 
the VPN will secure the transactions that must cross the public network.

                            IP Profile Parameters

         Address Translation Enabled:       Yes

         NAT Map List...                    Easy-PAT
         NAT Server List...                 Easy-Servers

         Local WAN IP Address:              0.0.0.0

         Remote IP Address:                 173.167.8.10
         Remote IP Mask:                    255.255.0.0

         Filter Set...
         Remove Filter Set

         Receive RIP:                       Both

Enter a subnet mask in decimal and dot form (xxx.xxx.xxx.xxx).