Руководство Пользователя для Netopia 4741 2a4na

 

Identify the connectors on the back panel and attach the necessar y Netopia cables.

The figure below displays the back of the Netopia 4741 ADSL Integrated Access Device. 

 

The following table describes all the Netopia 4741 ADSL Integrated Access Device back panel por ts.

1.

Connect the mini-DIN8 connector from the power adapter to the power por t, and plug the other end into an 
electrical outlet.

2.

Connect one end of the RJ-45 cable to the DSL por t, and the other end to your DSL wall outlet.

3.

Connect the Ethernet cable to the Ethernet por t on the unit and the other end to your Ethernet hub.

You should now have: the power adapter plugged in; the Ethernet cable connected between the router and 
your Ethernet hub; and the DSL cable connected between the router and the DSL wall outlet.

 

Port

Description

 

Telephone extension 
por ts

Four RJ-11 telephone jacks for connecting your phone extensions.

DSL por t

An RJ-48 10Base-T-style jack labeled DSL for your DSL connection.

Ethernet por t

An RJ-45 10/100Base-T Ethernet jack. You will use this to configure the Netopia 
4741. For a new installation, use the Ethernet connection. Alternatively, you can 
use the console connection to run console-based management using a direct 
serial connection. You can either connect your computer directly the Ethernet 
por t using a crossover cable, or connect both your computer and the Netopia 
4741 to an existing Ethernet hub on your LAN.

Console por t

A DB-9 console por t for a direct serial connection to the console screens. You 
can use this if you are an experienced user. See 

Power por t

A mini-DIN8 power adapter cable connection.

Console

Power

10/100

Ethernet

DSL

Telephone
Extensions

1

2

3

4

Telephone Extension ports

DSL Line port

10/100 Ethernet port

Console port Power port