Справочник Пользователя для Netopia 4752 2a4na

If you are using RFC1483 datalink encapsulation, the WAN Default Profile screen controls whether or not the 
SDSL link will come up without an explicitly configured connection profile. (PPP datalink encapsulation does not 
suppor t a default profile, and the corresponding menu item is unavailable.) See 

 for more information.

You access the Default Profile screen from the Main Menu by selecting WAN Configuration and then selecting 
Default Profile. 

The Default Profile screen appears.

■

You can set Must Match a Defined Profile item to Yes or No (the default). This item controls whether or 
not the SDSL link will come up without an explicitly configured connection profile. If your ISP is ser ving you 
a dynamic IP Address, you need not explicitly configure a connection profile, and the default behavior of the 
device will be to connect automatically once it is powered on.

■

If you select IP Parameters the IP Parameters screen appears (see 

). This screen allows you to configure various IP parameters for SDSL connections established 

without an explicitly configured connection profile.

Main

Menu

WAN

Configuration

WAN

Default Profile

                             WAN Default Profile

         Must Match a Defined Profile:      No

         IP Parameters...

Return/Enter accepts * Tab toggles * ESC cancels.
Configure Default WAN Connection Parameters here.