Справочник Пользователя для Netopia 4753 2a4na

The ATMP/PPTP Default Profile screen controls whether or not your device will answer VPN connection attempts 
without an explicitly configured connection profile. See 

 for more 

information.

You can connect to the Netopia 4753’s system configuration screens in either of two ways:

■

By using Telnet with the device’s Ethernet por t IP address

■

Through the console por t, using a local terminal (see 

)

You can also retrieve the Netopia 4753’s configuration information and remotely set its parameters using the 
Simple Network Management Protocol (see 

).

Open a Telnet connection to the device’s IP address; for example, “192.168.1.1.” 

The console screen will open to the Main Menu, similar to the screen shown below: 

To help you find your way to par ticular screens, some sections in this guide begin with a graphical path guide 
similar to the following example:

                           Netopia 4753 v5.1

                     Easy Setup...

                     WAN Configuration...

                     System Configuration...

                     Voice Configuration...

                     Utilities & Diagnostics...

                     Statistics & Logs...

                     Quick Menus...

                     Quick View...

Return/Enter goes to Easy Setup -- minimal configuration.
You always start from this main screen.