Справочное Руководство для Netopia r3100-u

IP Setup and Network Address Translation 11-19

toggle it to Yes.

■

From the NetBIOS Type pop-up menu, select the type of NetBIOS used on your network.

■

To ser ve DHCP clients with the NetBIOS scope, select Serve NetBIOS Scope and toggle it to Yes.

Select NetBIOS Scope and enter the scope.

■

To ser ve DHCP clients with the IP address of a NetBIOS name ser ver, select Serve NetBIOS Name Server
and toggle it to Yes.

Select NetBIOS Name Server IP Address and enter the IP address for the NetBIOS name ser ver.

You are now finished setting up DHCP NetBIOS Options. To return to the IP Address Ser ving screen press
the Escape key once.

■

To enable BootP’s address ser ving capability, select Serve BOOTP Clients and toggle to Yes.

Note: Addresses assigned through BOOTP are permanently allocated from the IP Address Ser ving pool
until you release them. To release these addresses, navigate back to the Main Menu, then Statistics &
Logs, Ser ved IP Addresses, and Lease Management. See

“Ser ved IP Addresses” on page 14-10

MacIP (Kip Forwarding) Options

When hosts using AppleTalk (typically those using LocalTalk) are not directly connected to an IP network (usually
an Ethernet), they must use a MacIP (AppleTalk-IP) gateway.

The optional Netopia AppleTalk feature enhancement kit provides for this ser vice. A MacIP gateway conver ts
network traffic into the correct format for AppleTalk or IP, depending on the traffic’s destination. The MacIP
gateway can also distribute IP addresses to AppleTalk computers on the network.

DHCP NetBios Options