Справочное Руководство для Netopia r3100-u

Current Date: The current date; this can be set with the Date and Time utility (see 

).

Default IP Gateway: The router’s default gateway, which may be either manually configured or learned via 
DHCP. This is the value you assigned in the Default IP Gateway field on 

. If you are using the router’s 

defaults (DHCP and NAT) this value will be 0.0.0.0. If you have assigned an IP address as your default gateway, 
it is shown here.

CPU Load: Percentage of the system’s resources being used by all current transmissions.

Unused Memory: The total remaining system memor y available for use.

Domain Name Server: If you are using the router’s defaults (DHCP and NAT) this value will be 0.0.0.0. If you 
have assigned an IP address as your default gateway, it is shown here.

Call Acct:  Shows whether you have enabled or disabled the call accounting features.

Domain Name: the domain name you have assigned, typically the name of your ISP

MAC Address: The Netopia R3100’s hardware address, for those inter faces that suppor t DHCP.

IP Address: The Netopia R3100’s IP address, entered in the IP Setup screen.

IPX Address: The Netopia R3100’s IPX address, entered in the IPX Setup screen.

EtherTalk Address: The Netopia R3100’s AppleTalk address on its EtherTalk Phase II inter face, entered in the 
EtherTalk Phase II Setup screen (only if the optional AppleTalk feature set is installed).

LocalTalk Address: The Netopia R3100’s AppleTalk address on its LocalTalk inter face, entered in the LocalTalk 
Setup screen (only if the optional AppleTalk feature set is installed).

                                  Quick View             8/13/1998 03:29:57 PM

 Default IP Gateway:  163.176.8.1        CPU Load: 3%    Unused Memory: 646 KB
 Domain Name Server:  163.176.4.31       Call Acct:      Disabled
 Domain Name: netopia.com

 ----------------MAC Address--------IP Address-------IPX Address---EtherTalk---
 Ethernet Hub:   00-00-c5-70-03-48  192.168.1.1                       24:150

                        Current WAN Connection Status
 Profile Name----------Rate--%Use-Remote Address-----Est.-More Info------------

                                 LED Status
 PWR-+-----WAN1------+--CON--AUX--+-----WAN2------+--EN--+--------LEDS---------
      LNK RDY CH1 Ch2   LNK  LNK   LNK RDY CH1 CH2  DATA | '-'= Off 'G'= Green
  G    -   -   -   -     -    -     -   -   -   -    Y   | 'R'= Red 'Y'= Yellow