Справочное Руководство для Netopia r3100-u

Acrobat® Reader for Windows and Macintosh, ZTerm terminal emulator software and NCSA Telnet 2.6 for 
Macintosh

You will need:

■

A Windows 95, 98, or NT-based PC or a Macintosh with Ethernet connectivity for configuring the Netopia 
R3100. This may be built-in Ethernet or an add-on card, with TCP/IP installed. 

■

An ISDN telephone line.

Identify the connectors and switches on the back panel and attach the necessar y Netopia Router cables.

1.

Connect one of the RJ-45 cables to any of the Ethernet por ts on the router.

(If you are connecting the router to an existing Ethernet hub, use Ethernet por t #1 on the router and set the 
crossover switch to the Uplink position.)

2.

Connect one end of one of the RJ-45 cables to the “Telco 1" or “Line 1" por t, and the other end to your wall 
outlet.

3.

Connect the mini-DIN8 connector from the Power Adapter to the Power por t, and plug the other end into an 
electrical outlet.

You should now have: the power adapter plugged in; the Ethernet cable connected between the router and 
your computer; and the telephone cables connected between the router and the wall outlets.

4.

Inser t your Netopia CD and follow the instructions to install an Internet browser and the Adobe Acrobat 
Reader, if you don’t already have them.

Phone
Ports

 Phone 2

 Phone 1

Auxiliary

Normal/Uplink

8

7

6

5

4

3

2

1

Ethernet

1

Console

Power

Telco 1

Telco 2

1   Ethernet

2   Telco

3   Power