Справочное Руководство для Netopia r6100

9.

Toggle or enter any IPX Parameters you require and return to the Add Connection Profile screen by pressing 
Escape. For more information, see 

10. Select Interface Group and press Return. From the pop-up menu select either Primary or Backup. If you 

select Primar y, the profile is applied to your primar y WAN inter face (the ADSL link). This would be desirable 
if you were creating a profile to store your authentication information for a PPP connection over the ADSL 
link. If you select Backup, the profile is applied to your backup inter face, whether that is an asynchronous 
modem attached to the Auxiliar y por t or a V.90 or ISDN WAN inter face module installed in the second WAN 
slot in the router. For more information, see 

.

11. Select ADD PROFILE NOW and press Return. Your new Connection Profile will be added.

If you want to view the Connection Profiles in your router, return to the WAN Configuration screen, and 
select Display/Change Connection Profile. The list of Connection Profiles is displayed in a scrolling pop-up 
screen.

                            IPX Profile Parameters

         Remote IPX Network:                          00000000
         Path Delay:                                  10
         NetBios Packet Forwarding:                   Off

         Incoming Packet Filter Set...                <<NONE>>
         Outgoing Packet Filter Set...                <<NONE>>

         Incoming SAP Filter Set...                   <<NONE>>
         Outgoing SAP Filter Set...                   <<NONE>>

         Periodic RIP Timer:                          60
         Periodic SAP Timer:                          60

Configure IPX requirements for a remote network connection here.