Справочное Руководство для Netopia r6100

■

Routing Information Protocol (RIP) is needed if there are IP routers on other segments of your Ethernet 
network that the Netopia R6000 Series needs to recognize. If this is the case select Receive RIP and 
select v1, v2, or Both from the pop-up menu. With Receive RIP set to v1, the Netopia R6000 Series’s 
Ethernet por t will accept routing information provided by RIP packets from other routers that use the same 
subnet mask. Set to v2, the Netopia R6000 Series will accept routing information provided by RIP packets 
from other routers that use different subnet masks. Set to Both, the Netopia R6000 Series will accept 
information from either RIP v1 or v2 routers.

■

If you want the Netopia R6000 Series to adver tise its routing table to other routers via RIP, select Transmit 
RIP and select v1, v2 (broadcast), or v2 (multicast) from the pop-up menu. With Transmit RIP v1 selected, 
the Netopia R6000 Series will generate RIP packets only to other RIP v1 routers. With Transmit RIP v2 
(broadcast) selected, the Netopia R6000 Series will generate RIP packets to all other hosts on the 
network. With Transmit RIP v2 (multicast) selected, the Netopia R6000 Series will generate RIP packets 
only to other routers capable of recognizing RIP v2 packets.

                            RIP Profile Parameters 

         Receive RIP:                       Both

         Transmit RIP:                      v2 (multicast)
         TX RIP Policy...                   Poison Reverse