Справочное Руководство для Netopia r6100

Скачать
Страница из 352
Security   16-19
Input and output filters—source and destination
There are two kinds of filters you can add to a filter set: input and output. Input filters check packets received 
from the Internet, destined for your network. Output filters check packets transmitted from your network to the 
Internet.
Packets in the Netopia R6000 Series pass through an input filter if they originate in the WAN and through an output filter if 
they’re being sent out to the WAN.
The process for adding input and output filters is exactly the same. The main difference between the two 
involves their reference to source and destination. From the perspective of an input filter, your local network is 
the destination of the packets it checks, and the remote network is their source. From the perspective of an 
output filter, your local network is the source of the packets, and the remote network is their destination.
Adding filters to a filter set
In this section you’ll learn how to add an input filter to a filter set. Adding an output filter works exactly the same 
way, providing you keep the different source and destination perspectives in mind.
To add an input filter, select Add Input Filter in the Add IP Filter Set screen. The Add Filter screen appears. (To 
add an output filter, select Add Output Filter.)
Type of filter
Source means
Destination means
Input filter
The remote network
The local network
Output filter
The local network
The remote network
The Netopia Router
input filter
output filter
LAN
WAN
packet
packet