Справочное Руководство для Netopia r6100

3.

If you only want to confirm the Ethernet IP Address or DNS configuration of your router so that you may 
configure the TCP/IP proper ties of your workstation appropriately, then from the Main Menu, go to Quick 
Menus -> IP Setup -> Ethernet IP Address. Once you know your routers Ethernet IP Address, go back to 
Step II and configure the TCP/IP proper ties of your workstation appropriately.

Note: The Ethernet IP Address in the IP Setup of your router will be the Gateway IP address you configure on 
your PC. The Ethernet Subnet Mask of your router will be the same Subnet Mask you specify in your PC.

4.

If you want to check whether your router has been configured appropriately as a DHCP ser ver (with the 
correct range of LAN IP Addresses as what is provided in the information from your ser vice provider), then 
from the Main Menu, go to Quick Menus -> IP Address Ser ving Setup. 

Once you are able to telnet to your router and successfully ping an IP address on the Internet, you have 
achieved Internet access from your workstation. If you are still unable to connect to the Internet using your 
browser, you should confirm the Internet Options in the Control Panel of your workstation are set to connect via 
a LAN (not a proxy ser ver and not a modem or dial-up adapter).

If you are able to open your browser and connect to sites using IP addresses but not domain names (ex. 
www.netopia.com), confirm the DNS Configuration in the TCP/IP proper ties of your workstation match the 
Primar y and Secondar y Domain Name Ser ver IP addresses configured in the Easy Setup of your router (see