Справочное Руководство для Netopia r6100
Console-Based Management 6-5
■
Through the console por t, using a local terminal (see
)
You can also retrieve the Netopia R6000 Series’s configuration information and remotely set its parameters
using the Simple Network Management Protocol (see
using the Simple Network Management Protocol (see
).
Open a Telnet connection to the router’s IP address; for example, “192.168.1.1.”
The console screen will open to the Main Menu, similar to the screen shown below:
Navigating through the configuration screens
To help you find your way to par ticular screens, some sections in this guide begin with a graphical path guide
similar to the following example:
similar to the following example:
This par ticular path guide shows how to get to the Network Protocols Setup screens. The path guide represents
these steps:
these steps:
1.
Beginning in the Main Menu, select System Configuration and press Return. The System Configuration
screen appears.
screen appears.
2.
Select Network Protocols and press Return. The Network Protocols screen appears.
3.
Select IP Setup and press Return. The IP Setup screen appears.
To go back in this sequence of screens, use the Escape key.
Netopia R6100 v4.8
Easy Setup...
WAN Configuration...
System Configuration...
Utilities & Diagnostics...
Statistics & Logs...
Quick Menus...
Quick View...
Return/Enter goes to Easy Setup -- minimal configuration.
You always start from this main screen.
You always start from this main screen.
Main
Menu
Network Protocols
Setup
IP Setup
System
Configuration