Справочное Руководство для Netopia r6100

Type the Domain Name your ISP gave you. Press Return. The next field, Primary Domain Name Server, will 
be highlighted.

4.

Type the Primar y Domain Name Ser ver address your ISP gave you. Press Return. If your ISP gave you a 
secondar y domain name ser ver address, enter it in the next field, Secondary Domain Name Server.  Press 
Return until the next field, Default IP Gateway, is highlighted.

5.

If you do not enter a Default IP Gateway value, the router defaults to the remote IP address you entered in 
the Easy Setup connection profile. If the Netopia Router does not recognize the destination of any IP traffic, 
it for wards that traffic to this gateway. 

Do not confuse the remote IP address and the Default IP Gateway’s address with the block of local IP 
addresses you receive from your ISP. You use the local IP addresses for the Netopia R6000 Series’s 
Ethernet por t and for IP clients on your local network. The remote IP address and the default gateway’s IP 
address should point to your ISP’s router.

6.

Press the Down arrow key until you reach NEXT SCREEN. Press Return.

The Easy Setup Security Configuration screen lets you password-protect your Netopia R6000 Series. Input your 
Write Access Name and Write Access Password with names or numbers totaling up to eleven digits.

If you password protect the console screens, you will be prompted to enter the name and password you have 
specified ever y time you log in to the console screens. Do not forget your name and password. If you do, you 
will be unable to access any of the configuration screens.

Additional security features are available. See 

The final step in configuring the Easy Setup console screens is to restar t the Netopia R6000 Series, so that the 
configuration settings take effect.

1.

Select RESTART DEVICE. A prompt asks you to confirm your choice.

                      Easy Setup Security Configuration

It is strongly suggested that you password-protect configuration access to your
Netopia. By entering a Name and Password pair here, access via serial,
Telnet and Web Server will be password-protected.

Be sure to remember what you have typed here, because you will be prompted for
it each time you configure this Netopia.

You can remove an existing Name and Password by clearing both fields below.

         Write Access Name:

         Write Access Password:

         PREVIOUS SCREEN       TO MAIN MENU      RESTART DEVICE

Configure a Configuration Access Name and Password here.