Справочное Руководство для Netopia r6100

■

If you select (Wan Module 2) Setup... and have a V.90 modem card in slot 2, the following screen appears:

■

You can edit the Modem Dialing Prefix, if necessar y, add a PBX Dialing Prefix (such as “9” for an out-
side line), set the conditions for whether the modem will Answer on Ring Type incoming calls, adjust 
the conditions for when the Speaker is On, and adjust the Speaker Volume, from the pop-up menus.

■

The default Modem Dialing Prefix is ATDT. You can edit it if you need to.

■

You can enter a PBX Dialing Prefix such as “9” if you are on a PBX or Centrex phone system and must 
dial a prefix for an outside line.

■

You may choose to selectively answer inbound calls, based on a distinctive ring pattern, using Answer 
on Ring Type... This permits you to set up a par ty line configuration where a fax machine or other 
device shares the line, but uses a different telephone number and ring pattern. Suppor ted options 
are:

■

You may choose when the Netopia R6000 Series’s modem connection tones are audible in the 

Ring Type:

Description:

Any

(the default) any pattern

Ring A

2.0 sec ON, 4.0 sec OFF (normal Nor th American ring pattern)

Ring B

0.8 sec ON, 0.4 sec OFF, 0.8 sec ON, 4.0 sec OFF

Ring C

0.4 sec ON, 0.2 sec OFF, 0.4 sec ON, 0.2 sec OFF, 0.8 sec ON, 4.0 sec 
OFF

Never

the line will not answer to any ring pattern

                             Internal Modem Setup

         Modem Dialing Prefix:              ATDT
         PBX Dialing Prefix:
         Answer on Ring Type...             Any
         Speaker On...                      Until Carrier
         Speaker Volume...                  2-Medium

Enter Information supplied to you by your telephone company.