Справочное Руководство для Netopia r6100

Identify the connectors and switches on the back panel and attach the necessar y Netopia Router cables.

The figure below displays the back of the Netopia R6000 Series ADSL Router. 

1.

Connect the mini-DIN8 connector from the power brick to the power por t on the router. Plug the power brick 
into the brick-to-wall outlet adapter cord. Plug the other end of the adapter cord into an electrical outlet.

2.

Connect one end of one of the RJ-45 cables to the Line 1 por t and the other end to your ADSL wall outlet.

Note: You may need to use the included DSL line adapter in order to accommodate the type of phone lines in 
your location. Some telephone connections have the copper line cable pairs reversed, and the line adapter is 
supplied to compensate for this configuration.

3.

Connect the other RJ-45 cable to your computer’s Ethernet por t and to any of the Ethernet por ts on the 
router.

(If you are connecting the router to an existing Ethernet hub, use Ethernet por t #1 on the router and set the 
crossover switch to the Uplink position.)

You should now have the power adapter plugged in, the Ethernet cable connected between the router and 
your computer, and the ADSL cable connected between the router and the ADSL wall outlet.

4.

Connect one end of one of the RJ-45 cables to the Line 2 por t and the other end to your analog telephone 
(R6120) or ISDN (R6131) wall outlet.

Ethernet

Normal

Auxiliary

Console

Power

8 por t Ethernet hub

Crossover switch

Line por ts

Auxiliar y por t

Console por t

Power por t

8

1

1

Uplink