Справочное Руководство для Netopia r6100

Note: ADSL routers are often pre-configured for you by your ser vice provider. If this is the case, you can skip 
this section. If your ser vice provider has not pre-configured your router, follow these instructions.

This section may be all you need to do to configure your Netopia R6000 Series ADSL Router to connect to the 
Internet. Most ISPs will supply you with several parameter values for you to enter in the router. The ISP will 
provide the values shown below: 

(If you want to record these values, you can print this page and use the spaces above.)

Parameter:

Your value:

First screen: ADSL Line Configuration

Data Link Encapsulation

RFC1483 (default) or 
PPP

Second screen: Connection Profile 1: Easy Setup Profile

Address Translation Enabled

Yes (default) or No

IP  Addressing

Numbered (default) or 
Unnumbered

Local WAN IP Address (Numbered) 
or Remote IP Address 
(Unnumbered)

n/a

Local WAN IP Mask (Numbered) or 
Remote IP Mask (Unnumbered)

n/a

PPP Authentication (PPP only)

None (default), PAP, 
CHAP

User Name (PAP) 
or Host Name (CHAP)

n/a

Password (PAP)
or Secret (CHAP)

n/a

Third screen: IP Easy Setup

Domain Name

n/a

Primar y Domain Name Ser ver

n/a

Secondar y Domain Name Ser ver

n/a

Default IP Gateway

n/a