Справочное Руководство для Netopia r7100-c

If you configure your Netopia R7100 using Smar tStar t, you can accept the dynamic IP address assigned by your 
router. The Dynamic Host Configuration Protocol (DHCP) ser ver, which enables dynamic addressing, is enabled 
by default in the router. If your PC is not set for dynamic addressing, Smar tStar t will offer to do this for you 
when you launch it. In that case, you will have to restar t your PC and relaunch Smar tStar t. If you configure your 
PC for dynamic addressing in advance, Smar tStar t need only be launched once. To configure your PC for 
dynamic addressing do the following:

Note: You can also use these instructions to configure other computers on your network to accept IP addresses 
ser ved by the Netopia R7100.

1.

Go to the Star t 
Menu/Settings/Control 
Panels and double click 
the Network icon. From 
the Network components 
list, select the 
Configuration tab.

2.

Select TCP/IP-->Your Network Card. Then select 
Properties. In the TCP/IP Proper ties screen (shown 
below), select the IP Address tab. Click “Obtain an IP 
Address automatically.”

3.

Click on the DNS Configuration tab. Click Disable DNS. 
DNS will be assigned by the router with DHCP.

4.

Click OK in this window, and the next window. When 
prompted, reboot the computer.