Справочник Пользователя для Netopia r9100

State: Displays the state of the specified route, based on the frequency of Routing Table Maintenance Protocol 
(RTMP) packets received for the route. The state can be Good, Suspect, or Bad. AppleTalk routers regularly 
exchange RTMP packets to update AppleTalk routing information.

Next Rtr Addr.: Displays the DDP or IP address of the next hop for the specified route. A DDP address is 
displayed if the router shown is on the local AppleTalk network. DDP address means that a connection to the 
next-hop router is by a native AppleTalk network (e.g.: LocalTalk or EtherTalk Phase II). An IP address is 
displayed if the Netopia R9100 is connected to the router shown using AURP. IP address means a connection 
transpor ts over AURP (AppleTalk encapsulated IP).

Pkts Fwded: The number of packets sent to the router shown.

You can view all of the IP addresses currently being ser ved by the Netopia R9100 Ethernet Router from the 
Served IP Addresses screen.

From the Statistics & Logs menu, select Served IP Addresses. The Ser ved IP Addresses screen appears.

To manage DHCP leases, select Lease Management in this screen.

                             Served IP Addresses

 -IP Address-------Type----Expires--Client Identifier--------------------------
 ----------------------------------SCROLL UP-----------------------------------
  192.168.1.100    DHCP    00:36    EN: 00-00-c5-4a-1f-ea
  192.168.1.101    DHCP    00:58    EN: 08-00-07-16-0c-85
  192.168.1.102
  192.168.1.103
  192.168.1.104
  192.168.1.105
  192.168.1.106
  192.168.1.107
  192.168.1.108
  192.168.1.109
  192.168.1.110
  192.168.1.111
  192.168.1.112
  192.168.1.113
 ---------------------------------SCROLL DOWN----------------------------------
 Lease Management...

   EN = Ethernet Address; AT = AppleTalk Address; CP = Profile Name; HX = hex