Справочник Пользователя для Netopia r9100

Locate all items that you need for the installation.

Included in your router package are:

■

The Netopia R9100 Ethernet Router

■

A power adapter and cord with a mini-DIN8 connector

■

Two RJ-45 cables (one for the Ethernet por t on your PC; one for the Line por t on the router)

■

A dual DB-9 and mini-DIN8 to DB-9 console cable (for a PC or a Macintosh)

■

The Netopia CD containing an Internet browser, Adobe Acrobat Reader for Windows and Macintosh, ZTerm 
terminal emulator software and NCSA Telnet for Macintosh, and documentation

You will need:

■

A Windows 95, 98, or NT–based PC or a Macintosh computer with Ethernet connectivity for configuring the 
Netopia R9100. This may be built-in Ethernet or an add-on card, with TCP/IP installed and configured. See 

.

■

An Internet modem such as a cable modem or DSL bridge connected to the appropriate wall outlet for your 
Internet ser vice source. Your Internet connection device must have a 10 Base-T Ethernet por t for 
connecting it to the router’s Line por t.

Identify the connectors and switches on the back panel and attach the necessar y Netopia Router cables.

The figure below displays the back of the Netopia R9100 Ethernet Router. 

1.

Connect the mini-DIN8 connector from the power adapter to the power por t, and plug the other end into an 
electrical outlet.

2.

Connect one end of one of the RJ-45 cables to the Line 1 por t (not the Line 2 por t), and the other end to 
your Internet modem’s Ethernet por t. DO NOT CONNECT IT DIRECTLY TO A TELCO LINE OUTLET.

Ethernet

Normal

Auxiliary

Console

Power

8 por t Ethernet hub

Crossover switch

Line 1 por t

Auxiliar y por t

Console por t

Power por t

8

1

1

Uplink