Справочник Пользователя для Netopia r9100

The Add Connection Profile screen appears.

On a Netopia R9100 Ethernet Router you can add up to 15 more connection profiles, for a total of 16, but you 
can only use one at a time.

1.

Select Profile Name and enter a name for this connection profile. It can be any name you wish. For 
example: the name of your ISP.

2.

Toggle the Profile Enabled value to Yes or No. The default is Yes.

3.

Select IP Profile Parameters and press Return. The IP Profile Parameters screen appears.

                             Add Connection Profile

         Profile Name:                      Profile 02
         Profile Enabled:                   Yes

         IP Enabled:                        Yes
         IP Profile Parameters...

         IPX Enabled:                       No

         Data Link Encapsulation...         PPP
         Data Link Options...

         Telco Options...

         ADD PROFILE NOW                    CANCEL

Return accepts * ESC cancels * Left/Right moves insertion point * Del deletes.
Configure a new Conn. Profile. Finished?  ADD or CANCEL to exit.

                            IP Profile Parameters

         Address Translation Enabled:       Yes

         Local WAN IP Address:              0.0.0.0

         Remote IP Address:                 0.0.0.0
         Remote IP Mask:                    0.0.0.0

         Filter Set...
         Remove Filter Set

         Receive RIP:                       Off

Toggle to Yes if this is a single IP address ISP account.
Configure IP requirements for a remote network connection here.