Руководство Пользователя для Champion usn-72
SAFETY SUMMARY
(Cont.)
SAFETY SUMMARY
x
Pg. 27- Never bypass a safety device in order to operate the dishwasher for normal operation.
Pg. 28- Dishwasher surfaces, dishracks and wares become hot during and immediately after washing operations.
Pg. 28- Dishwasher surfaces, dishracks and wares become hot during and immediately after washing operations.
Wear protective gear per your supervisor's directions.
Pg. 29- Dishwasher surfaces, dishracks and wares become hot during and immediately after washing operations.
Wear protective gear per your supervisor's directions.
Pg. 32- Deliming solutions or other acids must not come in contact with household bleach (sodium hypochlorite) or
any chemicals containing chlorine, iodine, bromine, or fluorine.
Mixing will cause hazardous gases to form.
Skin contact with deliming solutions can cause severe irritation and possible chemical burns.
Mixing will cause hazardous gases to form.
Skin contact with deliming solutions can cause severe irritation and possible chemical burns.
Pg. 32- Consult your chemical supplier for an appropriate deliming solution, protective gear and safety procedures.
Pg. 33- When working on the dishwasher, disconnect the electric service and place a red tag at the disconnect switch
Pg. 33- When working on the dishwasher, disconnect the electric service and place a red tag at the disconnect switch
to indicate work is being done on that circuit.
Pg. 34- When working on the dishwasher, disconnect the electric service and place a red tag at the disconnect switch
to indicate work is being done on that circuit.
Pg. 35- Do not lubricate the stainless steel conveyor chain or shaft bearings inside the dishwasher wash and power
rinse tanks.
Pg. 36- The conveyor drive contains moving parts.
Use caution when working around the conveyor drive assembly.
Pg. 37- When working on the dishwasher, disconnect the electric service and place a red tag at the disconnect switch
to indicate work is being done on that circuit
Pg. 40- When repairing a circuit, disconnect the power at the main service disconnect switch and place a red tag at
the disconnect switch to indicate that work is being performed on the circuit.
Pg. 40- Use Extreme Caution when performing tests on energized circuits.
Pg. 40- The conveyor drive contains moving parts. Use caution when working around the conveyor drive assembly.
Warning Statements
(Cont.)