Листовка для HP ProCurve Wireless Edge Services xl Module J9001A

3

Setting up the L2 ACL on the Web UI

To set the L2 ACL described above, login with a valid username and password into the WESM Web User 
Interface (UI) and then follow the next steps.

1.  Navigate to the Security hash, select the ACLs node and click the Add button on the lower right of the 

ACLs box section.

2.  A popup window will appear, select MAC Extended List from the dropdown menu and give the ACL an ID 

in the indicated range. You can look at Figure 1 for an example.

Figure 1: MAC ACL Configuration

3.  Select the recently created MAC Extended List and hit the Add button on the lower left side of the 

Associated Rules section. Another popup window will appear.

4.  Set a precedence number, select “permit” as the operation, and use “any” as the source and destination 

wildcards. Click on the Ethertype selection button to activate this option and on the enabled dropdown 
menu select ARP. Finally, click OK to save the rule. Check Figure 2 to see how everything should look.

Figure 2: Setting the L2 ACL parameters