Руководство Пользователя для Sony str-da3600es

• When a subwoofer is connected, turn on the 

subwoofer and turn up the volume 
beforehand. Turn the LEVEL knob to just 
before the mid-point.

• If you connect a subwoofer with the 

crossover frequency function, set the value 
to maximum.

• If you connect a subwoofer with an auto 

standby function, set it to off (deactivated).

Depending on the characteristics of the subwoofer 
you are using, the setup distance value may be 
further away from the actual position.

You can use the auto calibration function when 
you use the receiver as a pre-amplifier.
In this case, the distance value shown on the 
display may differ from the actual distance 
value. However, there will be no problems, 
even if you continue to use the receiver with 
that value.

The auto calibration function allows you to 
measure the following:
• Speaker connections

1)

• Polarity of speakers
• Speaker distance

2)

• Speaker size

2)

• Speaker level
• Frequency characteristics (EQ)

2) 3)

• Frequency characteristics (Phase)

2) 4)

1)

The measurement result is not utilized when the 
multi-channel input is selected.

2)

The measurement result is not utilized in the 
following cases.

– The multi-channel input is selected.
– “2ch Analog Direct” is being used.

3)

The measurement result is not utilized when 
Dolby TrueHD, or Linear PCM signals with a 
sampling frequency of 176.4 kHz and higher are 
being received.

4)

The measurement result is not utilized when 
signals with a sampling frequency of 88.2 kHz and 
higher are being received.

The menu is displayed on the TV screen.

V/v repeatedly to select 

b.

The Settings menu list appears on the TV 
screen.

V/v/B/b, 

MENU

RETURN/

EXIT O