Руководство По Работе для Sony str-da1000es
Enj
o
y
ing Su
rr
oun
d Sou
n
d
31
GB
In this mode, the receiver outputs the sound
from the front L/R speakers only. There is no
sound from the sub woofer.
from the front L/R speakers only. There is no
sound from the sub woofer.
Listening to 2 channel stereo
sources (2CH STEREO)
sources (2CH STEREO)
Standard 2 channel stereo sources completely
bypass the sound field processing and multi
channel surround formats are downmixed to 2
channel.
bypass the sound field processing and multi
channel surround formats are downmixed to 2
channel.
Press 2CH.
“2CH ST.” appears in the display and the
receiver switches to the 2CH STEREO mode.
receiver switches to the 2CH STEREO mode.
Note
No sound is output from the sub woofer in the 2CH
STEREO mode. To listen to the 2 channel stereo
sources using the front L/R speakers and a sub woofer,
set to the A.F.D. mode.
STEREO mode. To listen to the 2 channel stereo
sources using the front L/R speakers and a sub woofer,
set to the A.F.D. mode.
Listening to analog audio
(ANALOG DIRECT)
(ANALOG DIRECT)
You can switch the audio of the selected input to
the two channel analog input. This function
enables you to enjoy high quality analog
sources. Also see “D.PWR.” on page 39.
When using this function, only the volume and
front speaker balance can be adjusted.
the two channel analog input. This function
enables you to enjoy high quality analog
sources. Also see “D.PWR.” on page 39.
When using this function, only the volume and
front speaker balance can be adjusted.
1
Rotate INPUT SELECTOR to select the
input you want to listen to in analog
audio.
input you want to listen to in analog
audio.
2
Press DIRECT on the remote.
“A.DIRECT” appears in the display and the
analog audio is output.
analog audio is output.
Notes
• This function is cancelled when you switch the sound
• When this function is used, test tone function cannot
be used.
The Auto Format Direct (A.F.D.) mode allows
you to select the decoding mode you want for
your audio sound.
you to select the decoding mode you want for
your audio sound.
Decoding the input audio
signal automatically
signal automatically
In this mode, the receiver automatically detects
the type of audio signal being input (Dolby
Digital, DTS, standard 2 channel stereo, etc.)
and performs the proper decoding if necessary.
This mode presents the sound as it was recorded/
encoded, without adding any surround effects.
However, if there are no low frequency signals
(Dolby Digital LFE, etc.) it will generate a low
frequency signal for output to the sub woofer.
the type of audio signal being input (Dolby
Digital, DTS, standard 2 channel stereo, etc.)
and performs the proper decoding if necessary.
This mode presents the sound as it was recorded/
encoded, without adding any surround effects.
However, if there are no low frequency signals
(Dolby Digital LFE, etc.) it will generate a low
frequency signal for output to the sub woofer.
Press A.F.D. repeatedly to select “A.F.D.
AUTO”.
AUTO”.
The receiver automatically detects the type of
audio signal being input and performs the proper
decoding if necessary.
audio signal being input and performs the proper
decoding if necessary.
Tip
In most cases, “A.F.D. AUTO” provides the most
appropriate decoding. You may want to use SURR
BACK DECODING (page 34) to match the input
stream to the mode you prefer.
appropriate decoding. You may want to use SURR
BACK DECODING (page 34) to match the input
stream to the mode you prefer.
Enjoying Surround Sound
Using only the front
speakers
speakers
Enjoying higher fidelity
sound
sound
— AUTO FORMAT DIRECT
A.F.D. mode
(Display)
(Display)
Decoding mode
A.F.D. AUTO
(A.F.D. AUTO)
As encoded
PRO LOGIC
(DOLBY PL)
Dolby Pro Logic
PRO LOGIC II MOVIE
(PLII MOV)
Dolby Pro Logic II
PRO LOGIC II MUSIC
(PLII MUS)
Neo:6 Cinema
(NEO6 CIN)
DTS Neo:6
Neo:6 Music
(NEO6 MUS)
continued