Руководство Пользователя для Sony STR-DG910

US

D:\CANNES\SONY_HA\JOB 2007\STR-DG910\IM_910_US\STR-DG910_data\GB05TUN_STR-
DG910-UC.fm

STR-DG910

3-094-430-11 (1)

 

 

 

 

Press TUNING + to scan from low to 
high; press TUNING – to scan from high 
to low.
The receiver stops scanning whenever a 
station is received.

Turn INPUT SELECTOR to select the FM 
or AM band.

Press TUNING MODE repeatedly to select 
“AUTO T.”.

Turn TUNING +/–.

If the FM stereo reception is poor and “ST” 
flashes on the display, select monaural audio 
so that the sound will be less distorted.
• To select monaural audio, set “FM MODE” 

in TUNER menu to “FM MONO” (page 53).

• To return to stereo mode, set “FM MODE” 

in TUNER menu to “FM AUTO” (page 53).

You can enter the frequency of a station 
directly by using the numeric buttons.

You can also use INPUT SELECTOR on 
the receiver.

Example 1: FM 102.50 MHz
Select 1 b 0 b 2 b 5 b 0

Example 2: AM 1,350 kHz
Select 1 b 3 b 5 b 0

You can also use MEMORY/ENTER on 
the receiver.

If you have tuned in an AM station, adjust the 
direction of the AM loop antenna for optimum 
reception.

Make sure you have entered the right 
frequency. If not, repeat steps 2 to 4. If you 
still cannot tune in a station, the frequency is 
not used in your area.