Руководство Пользователя для Sony str-dh700

To use the “BRAVIA” Sync, turn the Control 
for HDMI function on for both the receiver 
and the connected component. The receiver is 
compatible with the “Control for HDMI-Easy 
Setting” function.

When you connect a Sony TV with the 
“Control for HDMI-Easy Setting” function, 
the Control for HDMI function of the receiver 
can be turned on simultaneously by turning the 
Control for HDMI function of the TV on.

Make sure that the receiver, TV, and 
playback components are connected 
using an HDMI cable (not supplied). 
(The respective components must be 
compatible with the Control for HDMI 
function.)

Turn on the receiver, TV and playback 
components.

Turn the Control for HDMI function of 
the TV on.
The Control for HDMI function of the 
receiver and all the connected components 
are simultaneously turned on. During 
setup, “CONTROL”, “SCAN FOR” and 
“HDMI” appear sequentially in the display, 
and once setting is completed, 
“COMPLETE” will appear. Wait until the 
setup is complete.

For details on setting the TV, refer to the 
operating instructions supplied with the TV.

Turn the Control for HDMI function of the 
receiver and the connected component on 
individually.

Perform the steps given in “When your 
TV is compatible with the “Control for 
HDMI-Easy Setting” function” 
(page 76).

Press AMP MENU.
“1-LEVEL” appears on the display.

Press 

V/v repeatedly to select “6-

HDMI”.

Press 

 

or 

b to enter the menu.

Press 

V/v repeatedly to select 

“CONTROL FOR HDMI”.
“CONTROL FOR HDMI” scrolls across 
the display, then “CONTROL” appears.

Press 

 

or 

b to enter the parameter.

Press 

V/v repeatedly to select “CTRL 

ON”.
Control for HDMI function is activated.

Select the HDMI input of the receiver 
and TV to match the HDMI input of the 
connected component, so that the 
image from the connected component 
is displayed.

.

<

<

>

O

AMP 
MENU

, 

 

V/v/B/b