Руководство Пользователя для Sony DCR-SR45

Touch , then .

If the item is not on the screen, touch   / 

 to change the page.

 (HOME) menu  page 55

 (OPTION) menu  page 69

The default settings are marked with .

The default setting is [ON], allowing you 

to view the demonstration in about 10 

minutes, after you turn the POWER switch 

to   (Movie).



 The demonstration will be suspended in the 

following situations.



 When you press START/STOP or PHOTO



 When you touch the screen during the 

demonstration (The demonstration starts 

again after about 10 minutes)



 When you turn the POWER switch to   

(Still)



 When you press   (HOME) or   (VIEW 

IMAGES)

See page 93.

 5min

The camcorder is automatically turned off 

when you do not operate your camcorder 

for more than approximately 5 minutes.



 NEVER

The camcorder is not automatically turned 

off.



 When you connect your camcorder to a 

wall outlet (wall socket), [A.SHUT OFF] is 

automatically set to [NEVER].

You can set the time that you want the 

camcorder to remain on before turning off 

in sleep mode (p. 27). (The default setting 

is [10min].)



 [A.SHUT OFF] does not work during sleep 

mode.

The default setting is [ON], allowing you 

to use the supplied Remote Commander 

(p. 100).



 Set to [OFF] to prevent your camcorder from 

responding to a command sent by another VCR 

remote control unit.

[DROP SENSOR] is set to [ON] as the 

default setting. When the drop sensor 

has detected that the camcorder has been 

dropped (  appears), recording or playing 

back recorded images may be disabled to 

protect the internal hard disk.



 Set the drop sensor to [ON] (default setting) 

when you use the camcorder. Otherwise, if you 

drop the camcorder, the internal hard disk may 

be damaged.







