Краткое Руководство По Установке для Oakley razrwire

Using the RAZRWIRE Module

TURN RAZRWIRE™ ON

ANSWER A CALL

ADJUST VOLUME

MUTE THE MICROPHONE

END A CALL

TURN RAZRWIRE™ OFF

Press the Call button briefly.

Press the Volume Up button repeatedly to increase the volume.
Press the Volume Down button repeatedly to decrease the volume.

Press and hold the Volume Down button for 2 seconds, until you hear a medium-pitched tone.

Press the Call button briefly.

Press and hold the Call button for 4 seconds, until you hear a series of 4 descending tones.

Pairing the RAZRWIRE Module With Your Phone

This one-time procedure must be done before you can use RAZRWIRE with your cellphone.

1. With RAZRWIRE turned off, press and hold the call button for five seconds. The indicator light will turn solid red.

2. Perform a “device discovery” from your phone. (Consult the user’s guide that came with your phone.)

3. Select “Oakley RAZRWIRE” from the list of discovered devices on your phone.

Follow the onscreen prompts to confirm your selection.

4. When prompted by the phone, enter the passkey “0000” (four zeroes).

Follow the onscreen prompts to confirm your selection.

When pairing is successful, the indicator light flashes rapidly ten times and RAZRWIRE turns on, ready for use.

Powering the RAZRWIRE Module On and Off

To turn RAZRWIRE on: Press the call button momentarily. Note: After you pair RAZRWIRE with your cellphone the first time (using

section titled, “Pairing RAZRWIRE With Your Phone”), RAZRWIRE will pair automatically each time you turn it on.

To turn RAZRWIRE off: While the device is not being used for an active call, press and hold the call button for three seconds until

the power-down audio tone is heard.

Note the following:

• When RAZRWIRE is activated, it is in “standby” mode, ready for use. The internal rechargeable

battery offers approximately 100 hours of standby time.

• When RAZRWIRE is turned off, it uses no power. However, the internal rechargeable battery will naturally

wear down over time, and will eventually require charging.

RAZRWIRE QUICK START GUIDE