Руководство Пользователя для Allworx 9202

 

300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com 

© 2008 Allworx. All rights reserved. 

Revised: May 28, 2008 

 

Page 7 

a.  Use the Up / Down navigation arrows, to select the Call Appearance PFK of the person you 

wish to put on hold and then press the HOLD button. (The display will show the two parties 
involved in the conference). 

b.  You may now talk to the remaining party. 

c.  The Call Appearance PFK for the person on hold will be flashing. To have the person re-join the 

conference, press CONFERENCE, then select the flashing Call Appearance PFK. The three-
way conference is then re-established. 

8.  End the conference by hanging up. 

4.4 Intercom  

1.  Lift the handset.  Press the INTERCOM button, and then dial the extension of the person you would like 

to talk to.  

2.  The call is connected when the LCD screen displays Active Call.  

3.  Start talking. The person you called will hear you over their speaker.  

4. Press 

the 

INTERCOM button to end the call. 

5.  To deny an incoming Intercom request, press the IGNORE soft key.  

4.5 Release  

The RELEASE button is used to hang-up an active call or to abort a new call setup, such as the middle of a 
transfer operation. 

4.6 Park  

PBX Behavior on a call appearance 

•  To park an active call, press the PARK button.   
•  The phone displays for 3 seconds the parking orbit (701 - 709) of where the call is parked. 

Key System Behavior on an outside line 

•  To place an active call in a “system-wide hold”, press the PARK button. Any phone with a PFK for that 

outside line will be able to retrieve the call. 

 

4.7 Mute/DND 

During a call, you can press the MUTE/DND button to turn off the microphone in the handset. The light on 
the MUTE/DND button is red when the phone is muted.