Листовка для Infocus Ceiling Mount Extension Arm: 6-9" SP-EXTARM-01

Модели

SP-EXTARM-01

ISSUED: 11-08-04 SHEET NO: 154-9007-1

Visit the InFocus Web Site at www.infocus.com

1 of 2

Installation and Assembly - InFocus

Adjustable Extension Column

IMPORTANT!

Read entire instruction sheet before

beginning installation and assembly.

Attach threaded end of adjuster tube (B) to threaded fitting in
ceiling plate. Align slot in end of adjuster tube (B) with one of the
holes in the side of threaded fitting. Insert and tighten one M5 x
.8 x 10 mm phillips screw (E) to lock adjuster tube (B) to
threaded fitting.

Optional: For security use M5 socket pin screw (provided with
projector mount) instead of M5 phillips screw (E). Tighten
using security allen wrench (provided with projector mount).

Description

Qty.

SP-EXTARM-01

SP-EXTARM-02

SP-EXTARM-03

SP-EXTARM-04

extension pipe

154-1025

154-1032

154-1034

154-1003

adjuster tube

154-1028

154-1030

2MD-55VS11D

M5 x .8 x 10 mm phillps screw

520-9250

M10 x 60 mm carriage bolt

580-1022

G M10 center lock nut

530-9402

Models:
SP-EXTARM-01
SP-EXTARM-02
SP-EXTARM-03
SP-EXTARM-04

This product is intended for use with UL
Listed products and must be installed by a
qualified professional installer.

Maximum Load Capacity : 900 lb (408 kg)

ceiling plate
(sold separately)

• Installer must verify that mounting surface will safely

support four times the combined weight of all attached
equipment and hardware.

WARNING

• Adjuster tube (B) must be fully threaded (six or seven

full turns) onto threaded fitting in ceiling plate and then
locked with screw (E).

WARNING

PART'S LIST