Справочник Пользователя для Enterasys mrx
ATTACHING THE CONSOLE
Page 2-1
CHAPTER 2
ATTACHING THE CONSOLE
This chapter describes information on the characteristics of supported
terminals, configuring the management console and connecting the
console cabling.
terminals, configuring the management console and connecting the
console cabling.
2.1
LOCAL MANAGEMENT CONSOLE
MRXI/LM is accessed by attaching a management console at the DB-9
CONSOLE port on the rear panel of the MRXI (see Figure 2-1). The
console connection supports a Digital Equipment Corporation VT200™
or VT300™ series terminal or PC emulation of one of these terminals.
CONSOLE port on the rear panel of the MRXI (see Figure 2-1). The
console connection supports a Digital Equipment Corporation VT200™
or VT300™ series terminal or PC emulation of one of these terminals.
Figure 2-1. Management Console Connection
Table 2-1 lists the setup requirements for the local management
console. If your terminal is a Digital Equipment Corporation VT200™
or VT300™ series terminal, press
console. If your terminal is a Digital Equipment Corporation VT200™
or VT300™ series terminal, press
F3
to access the Setup Directory. If
you have a terminal emulation of the Digital Equipment terminals,
refer to your equipment user manual for setup procedures.
refer to your equipment user manual for setup procedures.
MRXI
10BASE-T
HUB
A
MANAGEMENT
TERMINAL
CONSOLE
CABLE
DB-9
CONSOLE PORT