Руководство Пользователя для Kett tool 16 guage electric double-cut shear
14
Dust Collection
1. Hook the sander to a dust collector using a
4” diameter hose and clamp (A, Fig. 16).
JET offers a wide variety of hoses, adapters
and dust collectors.
JET offers a wide variety of hoses, adapters
and dust collectors.
2. Loosen the wing nut (B, Fig. 16) and pull the
gate (C, Fig. 16) open to allow air suction to
the sanding belt. Push the gate closed to
shut off air suction. Tighten the wing nut.
the sanding belt. Push the gate closed to
shut off air suction. Tighten the wing nut.
3. Push the gate (D, Fig. 16) down to shut off
air suction to the disc. Lift the gate to open
the air suction to the disc.
the air suction to the disc.
Maintenance
Keep the exposed metal surface of the disc
table clean and free of rust. Use a light coat of
paste wax to protect the surface.
table clean and free of rust. Use a light coat of
paste wax to protect the surface.
Lubrication
All moving parts run on sealed ball bearings and
require no lubrication.
require no lubrication.
Figure 15
Figure 16
Optional Accessories
708596 Open Stand with Belt Rack
708597 Closed Stand with Belt Rack
Dust Collectors and Accessories: see your JET Distributor