Руководство Пользователя для Marantz SR4023
7
BASIC
CONNECTIONS
BASIC
OPERA
TION
ADV
ANCED
CONNECTIONS
ADV
ANCED
OPERA
TION
TROUBLESHOOTING
OTHERS
NAMES AND
FUNCTIONS
ENGLISH
i
REMOTE CONTROL IN/OUT
terminals
Connect to a Marantz component equipped with
remote control (RC-5) terminals.
remote control (RC-5) terminals.
o
Speaker
terminals
Connect your speaker system(s) to these terminals.
There are two sets of terminals, so you can connect
either A and/or B speaker systems.
There are two sets of terminals, so you can connect
either A and/or B speaker systems.
!0
Subwoofer
Output
Connect this jack to the line level input of a powered
subwoofer.
subwoofer.
!1
MAIN IN jacks
Use these jacks to connect an extension pre amplifi er.
(See page 13)
When not used, leave these jacks connected with the
supplied connecting pins.
(See page 13)
When not used, leave these jacks connected with the
supplied connecting pins.
!2
PRE OUT jacks
Use these jacks to connect an extension power
amplifi er. (See page 13)
When not used, leave these jacks connected with the
supplied connecting pins.
amplifi er. (See page 13)
When not used, leave these jacks connected with the
supplied connecting pins.
!3
AUDIO
IN/OUT
(PHONO, CD, RECORDER 1,
RECORDER 2)
RECORDER 2)
These are the analog audio inputs and outputs. There
are 8 audio inputs (4 of which are linked to video
inputs) and 3 audio outputs (1 of which is linked to
video output). The audio jacks are nominally labeled
for recorder1 (CD recorder) recorder2 (cassette tape
deck), compact disc players, DVD players and etc....
The audio inputs and outputs require RCA-type
connectors.
are 8 audio inputs (4 of which are linked to video
inputs) and 3 audio outputs (1 of which is linked to
video output). The audio jacks are nominally labeled
for recorder1 (CD recorder) recorder2 (cassette tape
deck), compact disc players, DVD players and etc....
The audio inputs and outputs require RCA-type
connectors.
!4
GND (ground) terminal
Connect the grounding wire from the analog turntable
to this terminal.
to this terminal.
REAR PANEL
t
RS-232C
The RS-232C port is to be used in conjunction with
an external controller to control the operation of the
unit by using an external device.
an external controller to control the operation of the
unit by using an external device.
y
AC
OUTLETS
Connect the AC power cord of component such as a
DVD or CD player to this outlet.
The marked SWITCHED provides power only when
the SR4023 is turned on and is useful for components
which you use every time you play your system.
DVD or CD player to this outlet.
The marked SWITCHED provides power only when
the SR4023 is turned on and is useful for components
which you use every time you play your system.
Caution:
• In order to avoid potential turn-off thumps, anything
plugged into these outlets should be powered up
before the SR4023 is turned on.
before the SR4023 is turned on.
• The capacity of this AC outlet is 150W. Do not
connect devices that consume electricity more than
the capacity of this AC outlet. If the total power
consumption of the connected devices exceeds the
capacity, the protection circuit shuts down the power
supply.
the capacity of this AC outlet. If the total power
consumption of the connected devices exceeds the
capacity, the protection circuit shuts down the power
supply.
u
AC
IN
Connect to supplied an AC power cable, and connect
to an AC power outlet.
This unit requires a power voltage of 120V AC only.
to an AC power outlet.
This unit requires a power voltage of 120V AC only.
q
Antenna
terminals
FM antenna terminal
For connecting the supplied FM antenna or for
connecting an external FM antenna with a coaxial
cable, or for connecting a cable network.
For connecting the supplied FM antenna or for
connecting an external FM antenna with a coaxial
cable, or for connecting a cable network.
AM antenna and ground terminal
For connecting the supplied AM loop antenna. Use
the terminals marked “AM” and “GND”.
The supplied AM loop antenna will provide good AM
reception in most areas. Position the loop antenna to
the best reception.
For connecting the supplied AM loop antenna. Use
the terminals marked “AM” and “GND”.
The supplied AM loop antenna will provide good AM
reception in most areas. Position the loop antenna to
the best reception.
w
VIDEO
IN/OUT
(AUX, DSS, DVD, VCR)
These are the video inputs and output. There are 4
video inputs and 1 video output. Connect VCR, DVD
players, and other video components to the video
inputs.
The 1 video output can be used to be connected to
video tape recorder for making recording.
video inputs and 1 video output. Connect VCR, DVD
players, and other video components to the video
inputs.
The 1 video output can be used to be connected to
video tape recorder for making recording.
e
MONITOR output jack
Connect to the TV’s video input (VIDEO IN) jack.
r
FLASHER IN (Flasher input
terminal)
This terminal is to control the unit from another
zone.
Connect the control signal from a Keypad, etc.
zone.
Connect the control signal from a Keypad, etc.
REMOTE CONTROL
REMOTE CONTROL
AUX
AUX
DSS
DSS
DVD
DVD
VCR
VCR
IN
IN
IN
IN
OUT
OUT
IN
IN
OUT
OUT
DSS
DSS
DVD
DVD
VIDEO
VIDEO
VCR
VCR
AUX
AUX
MONITOR
MONITOR
IN
IN
IN
IN
IN
IN
IN
IN
IN
IN
IN
IN
IN
IN
OUT
OUT
OUT
OUT
IN
IN
IN
IN
OUT
OUT
PHONO
PHONO
GND
GND
L
L
R
R
SUB
SUB
WOOFER
WOOFER
PRE
PRE
OUT
OUT
OUT
CD
CD
PRE
PRE
OUT
OUT
OUT
RECORDER 2
RECORDER 2
(
(TAPE
TAPE)
)
MAIN
MAIN
IN
IN
RECORDER 1
RECORDER 1
(
(CD-R
CD-R)
)
AUDIO
AUDIO
RS-232C
RS-232C
R
R
R
R
L
L
L
L
AC IN
AC IN
CLASS 2 WIRING
CLASS 2 WIRING
GND
GND
AM
AM
FM
FM (
(75
75
Ω
Ω))
ANTENNA
ANTENNA
MODEL NO. SR4023
MODEL NO. SR4023
IN
IN
OUT
OUT
A
A
SYSTEM
SYSTEM
B
B
SPEAKER SYSTEMS
SPEAKER SYSTEMS
SYSTEM
SYSTEM
FLASHER
FLASHER
IN
IN
UNSWITCHED
UNSWITCHED
1.25A 150W
1.25A 150W
AC OUTLETS
AC OUTLETS
120V 60Hz
120V 60Hz
SWITCHED
SWITCHED
1.25A 150W
1.25A 150W
1.25A 150W
q
y
w
u
i
o
!0
!3
!1
!2
!4
e r
t