Руководство Пользователя для Marantz SR4023

ENGLISH

To program this unit for automatic standby, press the 
SLEEP button on the remote controller.
Each press of the button will increase the time before 
shut down in the following sequence.

OFF

10

20

30

50

40

120

90

80

70

60

100

110

The sleep time will be shown for a few seconds in the 
display on the front panel, and it will count down until 
the time has elapsed.
When the programmed sleep time has elapsed, the 
unit will automatically turn off. 
Note that the SLEEP indicator on the display will 
illuminate when the Sleep function is programmed. 
To cancel the Sleep function, press the SLEEP 
button until the display shows “SLEEP OFF” and the 
SLEEP indicator will disappear.

In normal operation, the audio or video source 
selected for listening through the SR4023 is sent to 
the record outputs. 
This means that any program you are watching 
or listening to may be recorded simply by placing 
machines connected to the outputs for RECORDER1 
OUT,  RECORDER2 OUT, and VCR OUT in the 
record mode.

  Select the input source to record by pressing 

the corresponding input selector button.

 

  The input source is now selected and you may 

watch or listen to it as desired.

 

  The currently selected input source signal is 

output to the RECORDER 1 OUT, RECORDER 2 
OUT, and VCR OUT outputs for recording. 

 

  Start recording to the recording component as 

desired.

Recording the video from one source and the 
audio from another
You can add the sound from one source to the 
video of another source to make your own video 
recordings.
Below is an example of recording the sound from 
a compact disc player connected to CD IN and the 
video from a video camera connected to AUX IN to 
video cassette recorder connected to the VCR OUT 
jack.

 

 Press 

the 

AUX input source button to set video 

output.

 

 Press 

the 

CD input source button to set audio 

output.

 

  Now “CD” has been selected as the audio input 

source and “AUX” as the video input source.

•  If you change the input source during recording, you 

will record the signals from the newly selected input 
source.

•  The setting of BASS, TREBLE, VOLUME, MUTE 

does not affect the recorded material.

• A given input source does not output on the same 

OUT channel (For example, the signal input from 
VCR IN is not output on VCR OUT).

• If you playback a video source that uses scrambled 

or encoded signals to prevent it from being dubbed, 
the picture itself may be disturbed due to those 
signals.