Справочник Пользователя для Marantz SR4500

Select to active the HT-EQ with the   or   cursor
buttons.
The tonal balance of a film soundtrack will be
excessively bright and harsh when played back
over audio equipment in the home. This is
because film soundtracks were designed to be
played back in large movie theater environments.
Activating the HT-EQ feature when watching a
film made for movie theaters corrects this and
restores the correct tonal balance.
The HT-EQ feature is available except in the
following modes.

• 7.1 CH INPUT

• PURE-DIRECT

• When VIRTUAL is set for the surround mode

Select the output level of the LFE signal included
in the Dolby Digital signal or the DTS signal.
Select 0 dB, -10 dB or OFF with the   or   cursor
buttons.

When you select “TO MAIN MENU” by pressing
the   or   button, you can return the SETUP MAIN
MENU by pressing the 

button.

This sub menu is to adjust channel levels for each
surround setting groups. There are three surround
setting groups shown below. Therefore if settings
for a surround mode are changed, settings for all
other surround modes in the same group are also
changed.

1 : AUTO, DOLBY, DTS, EX/ES, VIRTUAL,

STEREO

2 : Multi-ch stereo
3 : CS 

II

Select  “4. SURROUND” in SETUP MENU
with   or   cursor button.

Press the 

button.

To select a desired item, press   or   cursor
button.

Using the   or   cursor button to select the mode
or adjust the volume level of each speaker.

When you select “TO MAIN MENU” by pressing
the   or   button, you can return the SETUP
MENU by pressing the 

button.

Or press the   or   cursor button to select
“EXIT” then press the 

button to exit

the SETUP MENU.

Select the desired surround mode with 

or 

cursor button.

• If one of the following modes is selected, all other

modes are also set to the same. AUTO, DOLBY,
DTS, EX/ES, VIRTUAL, STEREO.

When you select “TO MAIN MENU” by pressing
the   or   button, you can return the SETUP
MENU by pressing the 

button.

Or press the   or   cursor button to select
“EXIT” then press the 

button to exit

the SETUP MENU.

• The BASS MIX setting is only valid when

“LARGE” is set for the front speakers and “YES”
is set for the subwoofer at stereo playback .

• When the “BOTH” is selected, the low

frequency signal range of “LARGE” are
produced simultaneously from those channels
and the subwoofer channel.

When actual low frequency sound volume is
weak depending on room size, use this function
to fill low frequency sound equally in the room.

• When  “MIX” is selected, subwoofer output is

determined depending on the speaker sizes for
each channels. If the front speaker size is set to
“Large”, subwoofer output is only the LFE signal
contained in Dolby Digital or DTS processed
signals.

• When Front speaker is set ”SMALL”, then BASS

MIX is set “MIX”. (The display appears “BASS
MIX =

 ✱✱✱”.)

EXIT

TO MAIN MENU

exit SETUP

MENU

Select “3. PREFERENCE” in SETUP MENU
with   or   cursor button.

Press the 

button.

Press   or   cursor button to select desired
item.

Press   or   cursor button to set the mode.

ENTER

AAC

ENTER

AAC

When this function is set to "ECONOMY", 
you can reduce the power consumption when 
the unit is in the standby mode.

This menu (BASS) will not be displayed, if SUBW is set "NONE".

For L&R is "SMALL" : 
The low frequency signal range of front L/R are outputted to a subwoofer 
simultaneously with the LFE signal.

For L&R is "LARGE" : 
The low frequency signal range of front L/R are not output to subwoofer.

The low frequency signal range of front L/R are outputted to a subwoofer 
simultaneously with the LFE signal.

SR4500U DFU_01_ENG 2_2

04.6.25, 11:07 AM

Page 21

Adobe PageMaker 6.5J/PPC