Справочник Пользователя для Marantz SR4600

When you select “MANUAL” in T-MODE menu
by pressing the   or   button, this unit will emit
a pink noise from the front left speaker. At this
time, adjust the desired level of the master
volume. Remember the level of this noise and
then press the   button. This unit will emit the
pink noise from the center speaker.

Using the   and   cursor buttons, adjust the
volume level of the noise from the center
speaker so that it is the same level as the front
left speaker (Note that this can be adjusted to
any level between – 10 and +10 dB in 1dB
intervals).

Press the   cursor button again. This unit will
now emit the pink noise from the front right
speaker.

Repeat steps 2 and 3 above for the front right
and other speakers until all speakers are
adjusted to the same volume level.

Press the 

 button, you can stop the

test tone mode. Or press the   or   cursor
button to select “EXIT” then press the 

button to exit the SETUP MENU.
Or press the   or   button to select
“RETURN” then press the 

 button to

return the previous “2-2. Speakers Distance”
setup.

• Speakers that you selected “None” for in the

Speaker Size Setup menu will not appear.

• The setup level for each channel is memorized for

reproduction in all surround mode by this method
exclude CS mode, Multi channel stereo mode and
7.1 ch input mode.

• To adjust the speaker levels for 7.1-channel input

sources, you will need to use the 7.1CH Level
Input setup menu.

Here you will set the volume for each speaker so
that they are all heard by the listener at the same
level. Moreover, if the 

 button is pressed,

unit can enter into this menu directly.

• The speaker level settings are not available in 7.1

Channel Input mode, CS mode and Multi Channel
Stereo mode.

Selects  “

”  or “

”  for generating

mode of test tone   or   cursor button.

If you select “

”

by pressing the   button, the

test tone will be cycled through in a circular pattern
which is L (Left) 

→ 

C (Center) 

→ 

R (Right) 

→ 

SR

(Surround Right) 

→

 SBR (Surround Back Right) 

→

SBL (Surround Back Left) 

→ 

SL (Surround Left) 

→

SW (Subwoofer) 

→ 

L 

→

.. increments of 2 seconds

for each channel.
Using the   and   cursor buttons, adjust the
volume level of the noise from the speaker so that
it is the same level for all speaker.
Press the 

 button, you can stop the test

tone mode. Or press the   or   cursor button to
select “EXIT” then press the 

 button to exit

the SETUP MENU.
Or press the   or   cursor button to select
“RETURN” then press the 

 button to return

the previous “2-2. Speakers Distance” setup.

If you select “

”, adjust the output level of

each speaker as follow.

Channel level (speaker level) can be adjusted
without using test tone.

• Four channel level settings can be memorized for

reproduction: the 7.1 ch input mode, CS mode,
Multi channel stereo mode, and all other surround
modes, respectively.

Set the surround mode or 7.1 ch input mode
which you want to adjust the channel level.

Press the 

 button on the remote.

Select the desired channel (speaker) with the

 or   cursor buttons.

Adjust the level with the   or   cursor buttons.

After completing the setup, press the 

button again.

EXIT

RETURN

TO MAIN MENU

Speaker

(Auto)

Speakers

Distance setup

MAIN

MENU

exit SETUP

MENU

Test Tone mode

Speakers

Distance

 setup

Direct select

by remote

control

Listening

Positiom

3

2

1

6

5

4

ENTER

Minimum

Maximum

1 dB interval

Reference

1 dB interval

 button

 button

AAC

SR4600U DFU_01_ENG 2_2

05.5.20, 5:41 PM

Page 20

Adobe PageMaker 6.5J/PPC