Справочник Пользователя для Marantz SR5500

Press the 

on the remote.

“

” appears on the display and

then the preset station with the lowest preset
number is recalled first.

Preset stations are recalled in sequence (No.1

→

 No.2 

→

 etc.) for 5 seconds each.

No stored preset number will be skipped.

You can fast forward the preset stations by
pressing the 

¢

 continuously.

When the desired preset station is received,
cancel the preset scan operation by pressing
the 

 button or 

on the remote.

Tune into the radio station you desire (Refer to
the 

” or 

section).

Press the 

button on the remote. “

“

(preset number) starts blinking on the display.

Enter the desired preset number by pressing
the 

buttons.

• When entering a single digit number (2 for

example), either input “02” or just input “2” and
wait for a few seconds.

Select the desired preset station by pressing
the   or   cursor

buttons on the front panel

Press the 

4

 or 

¢

 buttons to select the

desired preset station, or input your desired
preset channel with the 

buttons on

the remote.

3

2

1

6

5

4

9

8

0

7

To select FM , press the 

button on the

front panel.

While pressing the 

button, press the 

cursor

button.

“

” will appear on the display,

and scanning starts from the lowest frequency.

Each time the tuner finds a station, scanning
will pause and the station will be played for
five seconds.
During this time, the following operations are
possible.
The band can be changed by the 

button.

If no button is pressed during this period, the
current station is memorized in location Preset
02.
If you wish to skip the current station, press
the   cursor

button during this period, this

station is skipped and auto presetting
continues.

Operation stops automatically when all 50
preset memory positions are filled or when
auto scanning attains the highest end of all
bands. If you desire to stop the auto preset
memory at anytime, press the 

 button.

Tune into the radio station you desire (Refer to
the 

” or 

section).

Press the 

button on the front panel.

“

“ (preset number) starts blinking on the

display.

Select the preset number by pressing the

 or

 cursor

buttons, while this is still blinking

(approx. 5 seconds)

Press the 

button again to enter. The

display stops blinking.
The station is now stored in the specified
preset memory location.

When in the auto stereo mode, 

 indicator will

be illuminated on the display.
The “

” indicator is illuminated when a stereo

broadcast is tuned in.
At open frequencies, the noise is muted and the
“

” and “

” indicators are not illuminated.

If the signal is weak, it may be difficult to tune into
the station in stereo. In such a case, press the

 button on the front panel or remote.

“

” indicator is not illuminated, if FM stereo

broadcasts are received in monaural and the “

”

indicator is not illuminated.
To return to auto stereo mode, press the 

button or press 

button on the remote

again. 

 indicator is illuminated on the display.

With this unit you can preset up to 50 FM/AM
stations in any order.
For each station, you can memorize the frequency
and reception mode if desired.

This function automatically scans the FM and AM
band and enters all stations with proper signal
strength into the memory.

AAC

AAC

3

2

1

6

5

4

9

8

0

7

ENTER

AAC

3

2

1

6

5

4

9

8

0

7

AAC

SR5500U DFU_01_ENG 2_2

04.8.2, 4:13 PM

Page 30

Adobe PageMaker 6.5J/PPC