Справочник Пользователя для Marantz SR7500

Press the TUNER  button twice within two
seconds on the remote.

Press the > button until PAGE2 is displayed
and press the P-SCAN (D4) on the remote.
“PRESET SCAN” appears on the front display
and then the preset station with the lowest
preset number is recalled first.

Preset stations are recalled in sequence (No.1
→ No.2 → etc.) for 5 seconds each.
No stored preset number will be skipped.

You can fast forward the preset stations,
press the > button until PAGE4 is displayed
and press the P-SET+ (D4) continuously.

When the desired preset station is received,
cancel the preset scan operation by pressing
the CLEAR button or P-SCAN (D4) on the
remote.

Select the desired preset station by pressing
the   or   cursor buttons on the front panel

Press the TUNER  button twice within two
seconds on the remote.

Press the > button until PAGE4 is displayed

Press the P-SET+ (D4) or P-SET– (D5) button
to tune in the deseired preset station.
Or enter the preset station number with the
numeric buttons.

Tune into the radio station you desire (Refer to
the “MANUAL TUNING” or “AUTO TUNING”
section).

Press the MEMORY button on the front panel.
“– –“ (preset number) starts blinking on the
display.

Select the preset number by pressing the   or

 cursor buttons, while this is still blinking

(approx. 5 seconds)

Press the MEMORY button again to enter.
The display stops blinking.
The station is now stored in the specified
preset memory location.

Tune into the radio station you desire (Refer to
the “MANUAL TUNING” or “AUTO TUNING”
section).

Press the MEMO button on the remote. “– –“
(preset number) starts blinking on the display.

Enter the desired preset number by pressing
the numeric buttons.

• When entering a single digit number (2 for

example), either input “02” or just input “2” and
wait for a few seconds.

With this unit you can preset up to 50 FM/AM
stations in any order.
For each station, you can memorize the frequency
and reception mode if desired.

This function automatically scans the FM and AM
band and enters all stations with proper signal
strength into the memory.

To select FM , press the BAND button on the
front panel.

While pressing the MEMORY button, press
the    cursor button.
“AUTO PRESET” will appear on the display,
and scanning starts from the lowest frequency.

Each time the tuner finds a station, scanning
will pause and the station will be played for
five seconds.
During this time, the following operations are
possible.
The band can be changed by the BAND button.

If no button is pressed during this period, the
current station is memorized in location Preset
02.
If you wish to skip the current station, press
the   cursor button during this period, this
station is skipped and auto presetting
continues.

Operation stops automatically when all 50
preset memory positions are filled or when
auto scanning attains the highest end of all
bands. If you desire to stop the auto preset
memory at anytime, press the CLEAR button.

AAC

AAC

SR7500U DFU_01_ENG 2_3

04.9.22, 5:13 PM

Page 33

Adobe PageMaker 6.5J/PPC