Краткое Руководство По Установке для Multi-Tech mvp800

The following software loading procedure does not provide
every screen or option in the loading process.  The
assumption is that a technical person with a thorough
knowledge of Windows and the software loading process is
doing the installation.   Additional information on the MultiVOIP
software is provided in the User Guide supplied with your
MultiVOIP.
If you are installing a MultiVOIP behind a firewall, you need to
add the following UDP ports to your firewall.

Q.931 Signaling, Ch1[900]       Q.931 Signaling, Ch2 [902]
Q.931 Signaling, Ch3[904]       Q.931 Signaling, Ch4 [906]
Q.931 Signaling, Ch5[908]       Q.931 Signaling, Ch6 [910]
Q.931 Signaling, Ch7[912]       Q.931 Signaling, Ch8 [914]
Status [5000]
Ch1 RTP [5004]

Ch1 RTCP [5005]

Ch2 RTP[5006]

Ch2 RTCP [5007]

Ch3 RTP[5008]

Ch3 RTCP [5009]

Ch4 RTP[5010]

Ch4 RTCP [5011]

Ch5 RTP[5012]

Ch5 RTCP [5013]

Ch6 RTP[5014]

Ch6 RTCP [5015]

Ch7 RTP[5016]

Ch7 RTCP [5017]

Ch8 RTP[50018]

Ch8 RTCP [5019]

Refer to your firewall user documentation to enter and open
these ports.

1.

Verify that your MultiVOIP 800 has been properly cabled
and that the power is turned on.

2.

Insert the MultiVOIP 800 System CD into your CD-ROM
drive.  The CD should start automatically.  It may take 10
to 20 seconds for the Multi-Tech CD installation window to
display.